Invertek Optidrive ECO Knowledgebase Index

Invertek Optidrive ECO Knowledge Base Index.

All of the Documents in this Knowledge Base need a password to access them. 

Please email 'enquiries@motorcontrolwarehouse.co.uk' with your details and the document/s you are trying to access and we will provide you with the password.

Please Note:  These Knowledge Base documents are for MCW customers only

Doc Number

Title  (Click link to access)

Summary

MCW-ECO-001

Displaying RPM on the drives display

How to show RPM on the drives display

MCW-ECO-002

Optidrive ECO parameter P1-13 = 1 Set-up guideInformation on ECO parameter P1-13 = 1 (default)

MCW-ECO-003

Optidrive ECO Load profile monitoring functionInformation on ECO load profile monitoring function

MCW-ECO-004

Optidrive ECO Pump clean functionInformation on the ECO pump clean function

MCW-ECO-005

Optidrive ECO Fire mode operationInformation on the ECO fire mode operation

MCW-ECO-006

 Optidrive ECO pump stir operationInformation on the ECO pump stir operation

MCW-ECO-007

Optidrive ECO motor thermistor set-upInformation on the ECO motor thermistor input

MCW-ECO-008

Optidrive ECO Master - Slave Network set-upSetting 2 or more ECOs for master / slave network

MCW-ECO-009

Optidrive ECO PID controlInformation on the ECOs PID control loop

MCW-ECO-010

Optidrive ECO Keypad ControlInformation on ECO Keypad control

MCW-ECO-011

Optidrive ECO HAND/AUTO ControlInformation on ECO HAND/AUTO control 

MCW-ECO-012

Optidrive ECO Multi Pump Cascade ControlECO Multi Pump Cascade Control

MCW-ECO-013

ECO keypad Start/Stop with analogue referenceImplementing keypad Start/Stop with analogue ref

MCW-ECO-014

ECO Optiflow Multi Pump Cascade Control

Optiflow Multi Pump Cascade Control

MCW-ECO-015

Optidrive ECO Parameter P1-13 = 2 Set-up guideInformation on the ECO parameter P1-13 = 2

MCW-ECO-016

Optidrive ECO Parameter P1-13 = 3 Set-up guide

Information on the ECO parameter P1-13 = 3

MCW-ECO-017

Optidrive ECO Parameter P1-13 = 4 Set-up guide

Information on the ECO parameter P1-13 = 4

MCW-ECO-018

Optidrive ECO current limit and Overload

Information on ECO current limit and overload

MCW-ECO-019

ECO Modbus RTU Control & Register Mapping

ECO Modbus RTU Control & Register Mapping

MCW-ECO-020

ECO Duty Sharing / Duty Standby Control

Information on ECO duty sharing / duty standby 

MCW-ECO-021

Optidrive ECO Read Only Status Parameters

Information on ECO Read Only Status Parameters

MCW-ECO-022

Optidrive ECO Parameter P1-13 = 7 Set-up guide

Information on the ECO parameter P1-13 = 7

MCW-ECO-023

Optidrive ECO Parameter P1-13 = 8 Set-up guide

Information on the ECO parameter P1-13 = 8

MCW-ECO-024

Optidrive ECO Parameter P1-13 = 14 Set-up guide

Information on the ECO parameter P1-13 = 14

 MCW-ECO-025Optidrive ECO Service Time Interval FunctionInformation on the Optidrive ECO Service Time Interval Function

 MCW-ECO-026

 Optidrive ECO on Generator Supplies

 Information and considerations when using Optidrive ECO on generator supplies

 MCW-ECO-027

Powering Up ECO Control from 24VDCInformation on Powering Up the ECO Control from a 24VDC Power Supply

 MCW-ECO-028

Optidrive ECO STO (Safe Torque Off) Circuit ConnectionsInformation on Optidrive ECO STO (Safet Torque Off) Circuit Connections

 MCW-ECO-029

Optidrive Eco Variable and Constant Torque ModesGives information on the Optidrive Eco Variable and Constant Torque Modes 

 MCW-ECO-030

Optidrive Eco Motorised Potentiometer ControlGives information on setting up the Optidrive Eco for motorised potentiometer control 

MCW-ECO-031

Optidrive Eco Preset (Fixed) Speed Set-upsGives information on setting up the Optidrive Eco for preset (fixed) speed control

MCW-ECO-032

Optidrive ECO Fault FindingGives information on fault finding on Optidrive ECO

MCW-ECO-033

Using Optidrive ECO with ACPM and BLDC motors in open loopInformation on setting up Optidrive ECO for use with an AC Permanent Magnet (ACPM) servo motors and Brushless DC (BLDC) motors in open loop control

MCW-ECO-034

Using Optidrive P2 with Synchronous Reluctance MotorsInformation on setting up Optidrive P2 for use with Synchronous Reluctance motors

MCW-ECO-035

ECO - Reducing Induction Motor Audible Noise In Inverter Drive ApplicationsInformation on Optidrive ECO - Reducing Induction Motor Audible Noise In Inverter Drive Applications

MCW-ECO-036

Optidrive ECO Auto-Start and Auto-Reset FunctionsInformation on Optidrive ECO Auto-Start and Auto-Reset Functions