Invertek Optidrive P2 Knowledge Base Documents - Index

Invertek Optidrive P2 Knowledge Base Index.

All of the Documents in this Knowledge Base need a password to access them. 

Please email 'enquiries@motorcontrolwarehouse.co.uk' with your details and the document/s you are trying to access and we will provide you with the password.

Doc Number

Title  (Click link to access)

Summary

MCW-P2-001

 P2 Parameter P1-13 = 1, Set-up Guide

 P2 Set-up guide with P1-13 = 1 - Default terminal configuration

MCW-P2-002

 P2 Motorised Potentiometer Set-up Guide 3 different set-ups for motorised pot function on Optidrive P2

MCW-P2-003

 P2 Displaying RPM on the drives display
 How to show RPM on the drives display

MCW-P2-004

 P2 Control Mode - Parameter P4-01
 Information on P2 Parameter P4-01 - Control Mode

MCW-P2-005

 P2 Autotune - Parameter P4-02
 Information on P2 Parameter P4-02 - Autotune

MCW-P2-006

 P2 Closed loop control with incremental encoder
 Setting P2 in closed loop control with AC motor and encoder

MCW-P2-007

 P2 Saving a User Parameter Set Information on P2 saving a User Parameter set

MCW-P2-008

 P2 Keypad Control Setup Information
 P2 Keypad Control Setup Information

MCW-P2-009

 P2 Displaying motor current on the drives display
 How to show motor current on the drives display

MCW-P2-010

 P2 PID Control
 Basic set up of the Optidrive P2 PID loop

MCW-P2-011

 P2 min & recommended brake resistor values
 Optidrive P2 minimum and recommended braking resistor values

MCW-P2-012

 Optidrive P2 current limits and overload
 Information on the Optidrive P2 current limits and overload

MCW-P2-013

 Optidrive P2 Read Only Status Parameters Information on the Optidrive P2 read only status parameters

MCW-P2-014

 Setting P2 for an AC PM motor in open loop
 Information on Setting up Optidrive P2 for use with an AC Permanent Magnet (PM) servo in open loop control

MCW-P2-015

 Optidrive P2 Simple Motor Brake Control

 Information on setting up the P2 to control a simple motor brake

MCW-P2-016

 Optidrive P2 Hoist Mode Control

 Information on setting up the Optidrive P2 for Hoist mode control for crane type applications

MCW-P2-017

 Optidrive P2 Dynamic braking

 Information on setting up the Optidrive P2 for dynamic braking

MCW-P2-018

 Optidrive P2 3 preset speeds from 3 or 4 separate terminals

 Information on setting up the Optidrive P2 for 3 preset speeds from 3 or 4 seperate terminals (3 set up examples in this document)

MCW-P2-019

 Optidrive P2 motor thermistor set-up

 Information on how to set up a motor thermistor with P2

MCW-P2-020

 Optidrive P2 Set up for controlling motor torque

 Information on how to set up the Optidrive P2 to control motor torque

MCW-P2-021

 Optidrive P2 Bi-polar speed reference set-up

 Information on how to set up the Optidrive P2 for acheiving an analogue bi-polar speed reference

MCW-P2-022

 Using an A and B output encoder with Optidrive P2

 Information on the connections required when using an A and B output encoder with Optidrive P2

MCW-P2-023

 Optidrive P2 Limit switch set up

 Information on how to set up the Optidrive P2 for limit switch operation

MCW-P2-024

 Optidrive P2 Variable Speed Select Function

 Information on how to set up the Optidrive P2 for a variable speed select function

MCW-P2-025

 Optidrive P2 on Generator Supplies

 Information and considerations for using Optidrive P2 on a generator supply

MCW-P2-026

Optidrive P2 P1-13 = 21 Set-up Guide Information on Optidrive P2 P1-13 = 21 Set-up Guide - Momentary push button Start / Stop control

 MCW-P2-027

Powering up the P2 Control from 24VDCInformation on Powering up the P2 Control from 24VDC 

 MCW-P2-028

P2 Parameter P1-13 = 21 Set-up Guide - Momentary Control Information on P2 Parameter P1-13 = 21 Set-up Guide - Momentary Control 

 MCW-P2-029

Optidrive P2 STO (Safe Torque Off) Circuit ConnectionsInformation on Optidrive P2 STO (Safe Torque Off) Circuit Connections

 MCW